Cleaning Out The Chimney

Friday, August 1st, 2008

When we first moved in, there was a slight chill in the air. I guess it was early May or something, when it still gets chilly at night. I am not too good with the cold, so I got a going in the .

As the was burning in the , I thought to myself, “Hmmm, I wonder when the last time this chimney was cleaned out.” Now, if I was my father, I would be up in the roof looking down it with a flashlight. Since I am me, I let the burn and thought about it again a few months later.

It has been a few months. A while back, I got a postcard in the mail from Safeside Chimney out of . It included a $20 a coupon. I decided to call them for a .

As a side note, if you are thinking about buying a house and keeping it nice, it can cost a fortune. Ok, I said it.

Anyway, yesterday, the chimney guys came. They were scheduled to clean both the chimney flue as well as the flue. I thought this was a pretty good idea to get done in the Summer, since we are not using them all too much. I will admit that we almost overlooked this chore. If this company didn’t send me the coupon, I am not sure I would’ve called. It is quite important to keep these things clean, as they can cause big problems if you don’t.

Man sweeping chimney.

Man sweeping chimney.

Now, when I told my father that I had a company come over to sweep the chimney, he said, “So, you don’t want to get a sweeper and a few and do it yourself?” That’s the house I (thankfully) grew up in. We did it ourselves and learned the entire time. This time is a little different. First of all, I keep thinking that I am not as limber as I used to be. Second of all, I am probably not as strong as I used to be and third of all, there ain’t no way I am going up on this to clean out this chimney. You tell me if you would do it…

Looking up the side of the chimney from the outside.

Looking up the side of the chimney from the outside.

No %$^& way I am going up there. You should’ve seen the guy trying to get down. It would’ve been easier for him to jump into one of the big air things the cops use when someone is getting ready to jump off a building.

The good news is that the chimney was cleaned. The bad news is that he found a in the chimney crown while he was up there. To prove this, he brought up the company digital camera. When he got down, he showed me. I believed him, but I still went inside to get the binoculars, just to make sure he wasn’t pulling a fast one. I didn’t know if he was showing me the same photo he shows everyone. Well, come to find out, there is a in the chimney crown. Luckily, it is an easy, but expensive repair.

He wrote me up an estimate to repair the chimney crown as well as to install a chimney cap. There wasn’t a chimney cap installed. He said that by doing this, wouldn’t make the worse and eventually lead to popping the bricks out of the chimney and doing more extensive damage to the house. Whatever…I just signed the estimate and told them to call me to set up a time to fix it. I will tell you that repairing the top of a chimney was not on my list of priorities.

Here are some photos of the cleaned chimney, from the inside.

Looking inside the cleaned fireplace.

Looking inside the cleaned .

Looking up past the fireplace damper.

Looking up past the damper.

Looking up the chimney flue.

Looking up the chimney flue.

Related posts

Under the Bathroom Sink

Sunday, November 4th, 2007

I thought I should take a few pictures to show you what I was talking about in the last post when I mentioned that I was having difficulties with moving the , due to the feed .

From my previous post…

Well, then I hit a snag. I opened the doors to get under the . I removed all the stuff under there and noticed that there was a drain pipe (PVC) and two copper feed . Well, the two copper were poking up through two holes drilled in the thick wood base of under the . I started to think how the heck I was going to get the pulled out, when there was no way to do that with those the way they were. I had to drill, grind and cut a chunk of the wood base away. I must say, the first time this was installed probably was a snap. Removing it wasn’t. That took a few hours, I’m sure.

Do you see what I am talking about? I had to cut away that big chunk. I have to admit that I sat there for a few moments scratching my head, wondering how I was going to do that. I began by using my new Dremel, but later moved on to my . The really hard part was getting to that board in the back, going down the wall. After I cut that, things were a little loose. I had to ask Tim next door for some wood. He gave me a chunk, which I cut and screwed in underneath as a brace. It’s good now.

Also, the drain pipe was leaking a little. Let me ask you a question…but first, take a look at this picture -

Who is the genious who thought up the idea of having 15 different pieces of PVC for about 12 inches of pipe? I mean, cars, buses, trucks and airplanes use nice, flexible pieces of hose all throughout their engines. They are under all different types of stress…temperature, movement and wear and tear. Those hoses last for years. Now, we move over to under a . The distance is less and the stress is much less. Yet, we need all different pieces to go one foot with a bend. WHOAAAA. A whole bend. Couldn’t we just use a flexible piece of hose with a bend in it with two hose clamps? I guess not. I went down to the hardware store this morning with this idea in mind. Nope, I came back with two packages and six different pieces. Oh yeah, by the way…can you think of a drain pipe that has ever leaked? Yeah, that’s a hard one. They leak too.

Sooo, I put that back together and we can use the again. Now, just waiting for the flooring guy to get here.

Related posts

About Me

This is my blog. Welcome to it. I write a lot of stuff that doesn't pertain to anything in particular, but you may find a common theme in here somewhere. Enjoy. More

Want to subscribe?

 Subscribe in a reader Or, subscribe via email:
Enter your email address:  
Find entries :