Friday, November 9th, 2007
Last night, I started a little fire in Harman P38 pellet stove. I usually fill the little area with pellets, squirt some gel on them, light it and start to eat dinner. It usually takes a few minutes for the gel to get the pellets to start burning.
Well, Laura and I got into a good conversation and I totally forgot about the pellet stove. The door was open and the pellets were kind of smoldering. I got up to close the pellet stove door. After I did that, the stove was burning fine. Here’s the problem…after a few minutes, I noticed that the auger wasn’t turning to feed more pellets so the stove would keep burning.
I got the flashlight and started poking around some things in the back of the stove, to no avail. I tried a few times to restart the fire, just to see if things would kick in normally. Nothing. The pellets just kept on burning normally, but they would eventually burn out, because there was no replenishment.
I looked up some things on Google and came across this site, with a page titled, “Harman Accentra Pellet Stove Problems.” There were some good posts there, but nothing that helped me. I decided to let the fire burn out and call the place I bought the stove from today. Also, just as a kicker, I lost the user manual. I think someone stole it…yeah, that’s it.
At this point, the fire was completely dead and all the fans on the stove stopped. I decided to go for it one more time. I filled the burning bowl with pellets and squirted the gel on. I lit it and quickly closed the door. This time, as soon as I closed the door, I heard the auger turning. After that, things were fine. The fire has been burning all night.
I am thinking that since I left the door open too long the first time, the switch that starts the auger never flipped. Something like that. After I let everything die, things were reset. Who knows.
So here is an update on how the pellet stove is working this year. I bought three tons of pellets at about $600 and change. This is more than enough for the season. The thing cranks out heat. It doesn’t make any dust or mess because I caulked the exhaust pipes (high temp). I heard someone, on the radio this morning, say that they already spent $3000 on heating fuel this year, and that is only going to last until December. Must be nice to live in a 60,000 square foot mansion. Anyway, you would think they would consider alternatives at this point, instead of calling radio stations to complain about how stupid they are. For $2000, they can have a brand new pellet stove…installed. Oh yeah, they also mentioned that they drive an hour each way to work every day and are spending $95 per week in gas. How do you spell H-Y-B-R-I-D? Ahhhhh. Why do we even bother?
Related posts
Posted in Home Improvement | 3 Comments »
Tuesday, August 7th, 2007
I just placed a phone call to the local Agway to pre-order my wood pellets for the year.
Every year, (I have been doing this for two years now) I like to get my pellets in August. I always think I am beating the rush. I guess I am, but there are quite a few people ahead of me this year. The lady on the phone told me that there were three truck loads to be delivered before me. I am thinking, “Ok, like three pickup truck loads?” No, three tractor trailer truck loads. There are twenty two tons on each truck. That’s a lot. I am going to get my delivery after those go out to the other people who pre-ordered.
I ordered three tons on discount, because it is before the season. The price goes up after the season starts and the demand is higher. I paid $199.99 per ton with a $30 delivery charge. That’s not bad. I only ordered one ton last year and kept finding myself at various stores buying bags of pellets. I didn’t want to run out this year.
The pellets I am going to get are made out of hardwood saw dust and come from Pennsylvania. It is recycled from the lumber mill. Apparently, this is the good stuff. I was advised that the softwood clogs up the stove, which reminds me that I have to clean my stove out for the season. They say that you should do that after every one ton of pellets burned. Hmmm…maybe I will write a post about how to clean your pellet stove.
Related posts
Posted in Home Improvement | No Comments »
Saturday, October 14th, 2006
I will keep this short…
Last night, the tempurature dropped into the 30s, so I thought it was a great time to get the new Harman P38 Pellet Stove kicked into high gear.
I think I will get the knack of getting the fire started soon enough. I filled up the pellet tray and squirted some starting gel on the pellets and lit the fire. I think the directions say that you should turn the fan on level 1 and then close the door. I did this and the fire stayed burning for about 5 minutes and then went out. After it went out, I applied more starting gel and mixed up the pellets a little. This time, I turned the fan on level 1 and kept the door open. This way, the fan is sucking out the smoke, but it’s not so strong that the breeze puts the fire out. After a few minutes, the pellets were glowing red hot, so I closed the door. I heard the screw turn to release more pellets into the tray and then the second fan kicked on to blow the heat around the room.
The stove heated up the room in no time, but I did smell some exhaust. I had already sealed up two joints in the exhaust pipe, but two more need to be done. I got in back of the stove to smell the suspect joints and sure enough, they stunk. A project for today…
Related posts
Posted in Autumn, Home Improvement | No Comments »
Monday, September 18th, 2006
When we first moved into our house, the boiler was turned off. We had no idea why. The home inspector told us that it was turned off during inspection, so therefore he could not comment on the operation of it. What a great inspector! I guess it was too far of a reach for him to lean over on the wall and flick the little red switch on. Oh well…the boiler was only 3 years old, so we gave it the benefit of the doubt.
The first day we moved in, I went downstairs and turned the red switch to the “On” position. In about 5 seconds, I heard it kick on and start right up. The thing worked great, but that is not what this post is about. This is a helpful post to all those poor innocent souls who have been told that they should keep their boilers on all summer long to avoid rust on the inside. Let me explain.
Once I turned the boiler on in the middle of August, I questioned the operation of it during the hottest months of the summer. It only provided heat for the house, since we are using an electric hot water heater for everything else. I asked a few people if I needed to keep the boiler running all summer and I got the same response: “Yes, it will rust if you don’t.” I didn’t ask too many questions because this same response came from a few different sources. Well, today, Paul and I were having a conversation about how I already spent $150 this summer from just keeping the boiler warm. He said, “Well, that’s from heating up your water to use upstairs.” I told him that we have an electric hot water heater for that. He asked why I don’t just shut off the boiler then. He gave me a small chuckle, the way only Paul knows how to do, and explained that the boiler won’t rust unless…well something about oxygen in the lines. He said it would be fine. I didn’t believe him, so I called my oil company, Porco Energy. A woman answered the phone and I explained to her my concern. She then told me the exact thing Paul just told me, that I could turn the boiler off during the summer!
Guess what I am doing when I get home tonight. I really wish someone told me this in May.
Related posts
Posted in Home Improvement | 2 Comments »
