The First Fire Of The Season In The Fireplace
September 11, 2008 – 6:49 pm | by jaygaulardcom
|
|
It was a bit chilly last night at around 50 degrees. It wasn’t chilly enough to make a fire, but I did anyway. I wanted to see how everything worked. I mean, I know how everything works, I just wanted to see it in action.
I made a fire with some fairly green wood I took out of the woods a few weeks ago. It was a little smokey and hissed, while the moisture evaporated out of the ends of the logs. I know that kind of wood isn’t meant to be burned, but it had to be done.
After a while, the fire got going pretty good…
I am not sure how much heat this fireplace is going to produce this Winter. From what I have been reading, not much. Fireplaces aren’t too efficient. I guess the issue is that when the fire goes out, all the heat in the house goes right up the chimney. This fireplace does have glass doors though, so I can close them before we go to sleep, stopping some of the heat from escaping the house.
I really want the Hampton Wood Insert HI300. This wood burning stove insert has a nice, glossy baked on enamel so it looks really good. It has a BTU of 75,000, an efficiency of 77%, can handle a log size of 18″ and has a burn time of 8 hours. Also, this wood stove has an optional blower, so you can really pump up the heat.
I hate the fact that I have been thinking about this wood stove so much, because that means I am most likely going to get it. I just want to get into the season a bit to see how the pellet stove does.
I like the idea of having both a pellet stove and a wood stove.
Related posts
Tags: btu, chimney, efficiency, fire, fireplace, fireplaces, first fire, glass doors, heat, logs, pellet stove, smoke, Winter, wood, wood burning stove, wood burning stove insert, wood stove
