Mustang Mach 1 - Replacing the Floor
July 23, 2007 – 11:05 am | by gaulardcom
|
|
Jeff sent me a few updated photos of the restoration of his 1970 Ford Mustang Mach 1. Ok, here goes…
…attached are the pix of the front end. It’s lined up (well the best its gonna get for this). The inner structure is all welded in. Now, it ready for a complete clean up and to fill the pinholes. I am going to adjust the gaps the best I can and get her primed. It still needs a new hood and right fender.
Here are some photos of the drivers floor cut out. The new floor section will start welding in tomorrow.
July 15th…The left floor is finally ground down. It took 9 grinding discs to get the welds ground down. It has a coat of epoxy oprimer on it. Any minor imperfections can now be fixed and primed with a heavy build primer. The seat base is next to go in.
Related posts
Tags: Cars, Ford Mustang
